Xtreme Clutch 200 mm sprung ceramic single-plate clutch kit for the listed Mazda 616 and RX-3 manual applications. Intended for performance use where increased heat capacity is required.
FITMENT Mazda 616 1.6, June 1973–February 1978; NA, 1586 cc petrol, 55 kW. Mazda RX-3 S102A 1.0, September 1971–March 1973; 10A, 982 cc petrol, 78 kW. For the matching manual gearbox only. Match the engine, gearbox input spline, existing flywheel and release arrangement. The shared kit does not establish compatibility with other Mazda rotary models, engine swaps or automatic transmissions.
SPECIFICATIONS Part number: KMZ20001-1B Construction: single plate Friction disc: sprung ceramic Disc diameter: 200 mm Input spline: 22 teeth, 24.5 mm diameter Supplier-rated torque capacity: 320 Nm Supplier-specified clamp load: 540 kg, 40% increase over standard Flywheel step: +0.5 mm Recommended use: performance and track applications
PURCHASED PARTS PACKAGE Heavy-duty pressure plate, sprung ceramic friction disc, release bearing, pilot bearing and alignment tool. Flywheel is not included.
INSTALLATION AND USE Check the condition and profile of the existing flywheel and the release components. Follow the supplied fitting instructions and the manufacturer bedding-in guidance. Ceramic friction material can engage more abruptly than an original road clutch. The supplier torque rating does not establish a safe limit for the gearbox or other drivetrain components.
